Information on Product Uses

Applications of the dry or hydrated product:

• After hydration of the dry product, it becomes a transparent gel that is greatly expanded.
• When the product is mixed dry into a substrate, it is recommended that an empty space of a minimum of 15% be left in containers. During hydration, the substrate could overflow its container.
• Dry product must not be placed under plugs. The plant could be destabilized after AquaLoc hydration.
• It is preferable to mix the dry product in an irrigated soil or substrate.
• On the other hand, hydrating the product in a non- irrigated soil is recommended so that it becomes active immediately.

Choice of particle size: This is an important factor to consider based on the soil type.

• In general, the finer the particle size of the polymer, the greater its capacity and speed of absorption and vice versa.
• When applying AquaLoc to very porous soils (for example, sand, compost) use a small particle size for more rapid water absorption.
• In heavy soils (for example, clay), granules are preferable. They improve the porosity of the soil due to their great expansion capacity.
• In the preparation of dressings, use a very fine product to achieve adequate protection of the root hairs.

Very fine products:

• Because of their volatility, wearing a dust mask is recommended.
• If the product is hydrated before use, slowly pour the product into water.
• Stirring lightly will prevent the fine particles from clumping.

Additional Information:

• The higher the water temperature, the faster the absorption of water by AquaLoc.
• All the products in the AquaLoc line have a high absorption capacity. If the product is spilled, be sure not to rinse it with water. The ground would become extremely slippery. Shovel or vacuum it up.
• To clean equipment, blow off the powder traces with compressed air.
• Avoid contact with eyes and skin (use of gloves and goggles is recommended.)